American Hardwood Information Center

Smart, Cost-Effective, Treasured for Generations

When Refinishing is Required………

You or a professional floor refinisher can tackle the job. If the task is yours, be sure to properly prepare the area and you.

Sanding produces highly flammable dust, so remember to seal the doorways into your work area with plastic and ventilate the area with a fan. While sanding, wear goggles, ear protection and a dust mask. And when applying the finish, wear goggles, rubber gloves, long pants and a long-sleeve shirt, for added protection.

Keep in mind that the goal is NOT to sand through the finish, but to lightly sand the top coat until the finish feels smooth.

Use either a buffer with an abrasive pad and/or fine-grit sand paper or a rectangular oscillating sanding machine. Hand-sand any areas that remain rough or irregular.
Remove dust by sweeping, vacuuming and wiping the floor with a lint-free towel slightly dampened with water.

Once the floor is completely dry, apply a single coat of polyurethane finish. For a waxed floor, apply a mineral-spirit based renovating product and buff with a No. 1 steel wool pad. Allow the floor to dry completely, then wax and buff. These steps will brighten the appearance of the finish, not lighten the wood itself.

SPECIES GUIDE

Species Guide

VIEW ONLINE DOWNLOAD

MOBILE APP

Mobile App
VIEW MORE INFO

FROM FACEBOOK

American Hardwood Information Center
American Hardwood Information Center19 hours ago
October 21-27 is National Forest Products Week! Join us by following #ForestProductsWeek!

RECENT TWEETS

18 hours ago
October 21-27 is National Forest Products Week! Join us by following #ForestProductsWeek! https://t.co/58XZze0mjW AmericanHardwds photo

Pin It on Pinterest

Share This